Diagnosis Procedure
- CHECK OVERALL FUNCTION
Check ASCD indicator under the following conditions.
ASCD INDICATOR CONDITION REFERENCE CHARTASCD INDICATOR CONDITION SPECIFICATION CRUISE LAMP - Ignition switch: ON
MAIN switch: Pressed at 1st time → 2nd ON → OFF SET LAMP - MAIN switch: ON
- Vehicle: Between 40 km/h (25 MPH) and 144 km/h (89 MPH)
ASCD: Operating ON ASCD: Not operating OFF OK or NG
OK: INSPECTION END
NG: GO TO 2.
- CHECK DTC
Check that DTC UXXXX is not displayed.
Yes or No
Yes: Perform trouble diagnoses for DTC UXXXX.
No: GO TO 3.
- CHECK COMBINATION METER OPERATION
Does combination meter operate normally?
Yes or No
Yes: GO TO 4.
No: Check combination meter circuit. Refer to COMBINATION METERS .
- CHECK INTERMITTENT INCIDENT
Refer to TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT .
INSPECTION END