LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (MR20DE) (Except CALIFORNIA) >> Ignition Signal >> Component Inspection >> Condenser-2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection: Condenser-2

  1. Turn ignition switch OFF.
  2. Disconnect condenser-2 harness connector.
  3. Check resistance between condenser-2 terminals 1 and 2.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

  4. If NG, replace condenser-2.
Fig 1: Checking Resistance Between Condenser-2 Terminals 1 And 2
G07140262Courtesy of NISSAN MOTOR CO., U.S.A.