Commercial Service Tool

COMMERCIAL SERVICE TOOL DESCRIPTION CHART

Tool number (Kent-Moore No.) Tool name		Description
Leak detector i.e.: (J-41416)	Courtesy of NISSAN MOTOR CO., U.S.A.	Locats the EVAP leak
EVAP service port adapter i.e.: (J-41413-OBD)	Courtesy of NISSAN MOTOR CO., U.S.A.	Applys positive pressure through EVAP service port
Fuel filler cap adapter i.e.: (MLR-8382)	Courtesy of NISSAN MOTOR CO., U.S.A.	Checks fuel tank vacuum relief valve opening pressure
Socket wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removes and installs engine coolant temperature sensor
Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12)	Courtesy of NISSAN MOTOR CO., U.S.A.	Reconditions the exhaust system threads before installing a new oxygen sensor. Use with antiseize lubricant shown below. 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907)	Courtesy of NISSAN MOTOR CO., U.S.A.	Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads.