Removal and Installation: Installation

Installation in the reverse order of removal.

CAUTION: Always route the side air bag module harness in the original location. Replace any deformed or damaged clips with the same type and color. Always install clips in the original location on the harness.

NOTE:

Before installation of the seat assembly, confirm that the inside and outside slide rails are locked at the same positions.
Confirm that the slide rail location pin is set to the hole on the floor.
When installing the LH front seat, tighten the bolts in the order shown.

Fig 1: Identifying LH Front Seat Bolts Tightening Sequence
Courtesy of NISSAN NORTH AMERICA, INC.
When installing the RH front seat, tighten the bolts in the order shown.

Fig 2: Identifying RH Front Seat Bolts Tightening Sequence
Courtesy of NISSAN NORTH AMERICA, INC.