Method B

Remove No. 1 ignition coil (1). Refer to , "REMOVAL AND INSTALLATION ".
- ←: Vehicle front
Fig 1: Identifying Ignition Coil No. 1
Courtesy of NISSAN NORTH AMERICA, INC.
Connect No. 1 ignition coil (3) and No. 1 spark plug with suitable high-tension wire (1) as shown in the figure, and attach timing light (2) clamp to this wire.
- ←: Vehicle front
Fig 2: Identifying Ignition Coil No. 1, Spark Plug No. 1 And High Tension Wire
Courtesy of NISSAN NORTH AMERICA, INC.

Fig 3: Identifying Electrode Dimensions And High-Tension Wire
Courtesy of NISSAN NORTH AMERICA, INC.
Check ignition timing.
- Timing indicator (1)
Fig 4: Checking Ignition Timing Using Timing Indicator
Courtesy of NISSAN NORTH AMERICA, INC.