Tire Pressure Sensor Registration: Notes
NOTE:
If tire pressure sensor was replaced, the new sensor will be in an "asleep" mode. To wake up sensor, see Transmitter Wake-Up Operation .
NOTE:
To register a new tire pressure sensor, a Nissan Signal Tech II scan tool or CONSULT scan tool can be used. A Transmitter Activation Tool (J-45295) is used in wake-up procedure and can aid in registration procedure if using the CONSULT tool system. Sensor registration and wake-up methods in this article reference CONSULT type scan tool procedures.
NOTE:
If a CONSULT-II is used without also using the CONSULT-II CONVERTER, a malfunction might be detected during self-diagnosis, depending on which control unit carries-out CAN communication.
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions:
- Activate TPMS transmitters
- Display TPMS transmitter IDs
- Display tire pressure reported by the TPMS transmitter
- Read TPMS DTCs
- Register TPMS transmitter IDs