Detailed Flow

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnostic worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

: GO TO 2.

Perform self diagnostic result. Refer to "CONSULT FUNCTION (ABS) ".

Are any DTCs displayed? 

YES: Refer to "DTC INDEX ".

NO: GO TO 3.

Check that the symptom is a normal operating condition. Refer to "DESCRIPTION ".

Is the symptom a normal operating condition? 

YES: Inspection End.

NO: GO TO 4.

Check ABS and brake warning lamps, and VDC OFF and SLIP indicator lamps operation. Refer to "METER SYSTEM: SYSTEM DESCRIPTION ".

Is ON/OFF timing normal? 

YES: GO TO 5.

NO: Perform warning lamp diagnosis. Refer to "COMPONENT FUNCTION CHECK " (ABS warning lamp), "COMPONENT FUNCTION CHECK " (brake warning lamp), "COMPONENT FUNCTION CHECK " (VDC OFF indicator lamp) or "COMPONENT FUNCTION CHECK " (SLIP indicator lamp).

Perform diagnosis applicable to the symptom. Refer to "SYMPTOM TABLE ".

: GO TO 6.

Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Refer to "CONSULT FUNCTION (ABS) ".

: Inspection End.