Detailed Flow
- COLLECT INFORMATION FROM THE CUSTOMER
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnostic worksheet. Refer to DIAGNOSTIC WORK SHEET .
GO TO STEP 2 .
- PERFORM SELF DIAGNOSTIC RESULT
Perform "Self Diagnostic Result". Refer to CONSULT FUNCTION (ABS) .
Are any DTCs displayed?
YES
Refer to DTC INDEX .
NO
GO TO STEP 3 .
- CHECK SYMPTOM OPERATING CONDITION
Check that the symptom is a normal operating condition. Refer to DESCRIPTION .
Is the symptom a normal operating condition?
YES
Inspection End.
NO
GO TO STEP 4 .
- CHECK WARNING AND INDICATOR LAMPS OPERATION
Check ABS and brake warning lamps, and VDC OFF and SLIP indicator lamps operation. Refer to SYSTEM DESCRIPTION .
Is ON/OFF timing normal?
YES
GO TO STEP 5 .
NO
Perform warning lamp diagnosis. Refer to COMPONENT FUNCTION CHECK (ABS warning lamp), COMPONENT FUNCTION CHECK (brake warning lamp), COMPONENT FUNCTION CHECK (VDC OFF indicator lamp) or COMPONENT FUNCTION CHECK (SLIP indicator lamp).
- PERFORM DIAGNOSIS APPLICABLE TO THE SYMPTOM
Perform diagnosis applicable to the symptom. Refer to SYMPTOM TABLE .
GO TO STEP 6 .
- FINAL CHECK
Perform "Self Diagnostic Result" again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Refer to CONSULT FUNCTION (ABS) .
Inspection End.