Removal & Installation
WARNING: This page is about the Sentra FE+S, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic CVT Trans, w/o Powertrain Assembly Removal | DOES NOT include wheel alignment. | 8.2 | 6.9 | C |
| Automatic CVT Trans, w/Powertrain Assembly Removal | DOES NOT include wheel alignment. DOES NOT include Air Conditioning System recover, evacuate and recharge. | 10.5 | 6.9 | C |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Automatic CVT Trans | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Automatic CVT Trans, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Automatic CVT Trans | 0.2 | C | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| Automatic CVT Trans | 0.3 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Automatic CVT Trans | 0.1 | C | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Automatic CVT Trans | Includes: Programming. | 0.6 | C | |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: | ||||
| Automatic CVT Trans | 0.5 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER & LINES: Flush: | ||||
| Automatic CVT Trans | Includes: Confirm Fluid temperature for level check. | 0.8 | C | |