Removal And Installation: Removal

Release the pawls using a suitable tool and lift the power window and door lock/unlock switch RH and finisher as an assembly and remove.
Disconnect the harness connector from the power window and door lock/unlock switch RH.
Release the four pawls (two on each side) using a suitable tool, then separate the main power window and door lock/unlock switch RH (1) from the main power window and door lock switch RH finisher (2).

Courtesy of NISSAN NORTH AMERICA, INC.

: Pawl

CAUTION:
Do not bend back the pawls on the switch finisher too far or breakage may occur.