EBD Function

ABS warning lamp, brake warning lamp and SLIP indicator lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC, TCS, ABS and EBD functions.

DTC	Malfunction detected condition	Fail-safe condition
C1101	When an open circuit is detected in rear RH wheel sensor circuit.	The following functions are suspended: VDC ABS EBD (only when both rear wheels are malfunctioning)
C1102	When an open circuit is detected in rear LH wheel sensor circuit.
C1103	When an open circuit is detected in front RH wheel sensor circuit.
C1104	When an open circuit is detected in front LH wheel sensor circuit.
C1105	When a short circuit is detected in rear RH wheel sensor circuit. When power supply voltage of rear RH wheel sensor is in following state: Rear RH wheel sensor power supply voltage: 7.2 V ≥ Rear RH wheel sensor power supply voltage When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large. When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal.
C1106	When a short circuit is detected in rear LH wheel sensor circuit. When power supply voltage of rear LH wheel sensor is in following state: Rear LH wheel sensor power supply voltage: 7.2 V ≥ Rear LH wheel sensor power supply voltage When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large. When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not normal.
C1107	When a short circuit is detected in front RH wheel sensor circuit. When power supply voltage of front RH wheel sensor is in following state: Front RH wheel sensor power supply voltage: 7.2 V ≥ Front RH wheel sensor power supply voltage When distance between front RH wheel sensor and front RH wheel sensor rotor is large. When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal.
C1108	When a short circuit is detected in front LH wheel sensor circuit. When power supply voltage of front LH wheel sensor is in following state: Front LH wheel sensor power supply voltage: 7.2 V ≥ Front LH wheel sensor power supply voltage When distance between front LH wheel sensor and front LH wheel sensor rotor is large. When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal.
C1109	When ignition power supply voltage is in following state: Ignition power supply voltage: 10 V ≥ Ignition power supply voltage. Ignition power supply voltage: 16 V ≤ Ignition power supply voltage.	The following functions are suspended: VDC TCS ABS EBD
C1110	When there is an internal malfunction in the ABS actuator and electric unit (control unit).	The following functions are suspended: VDC TCS ABS EBD
C1111	When a malfunction is detected in motor or motor relay.	The following functions are suspended: VDC TCS ABS
C1115	When difference in wheel speed between any wheel and others is detected when the vehicle is driven, because of installation of tires other than specified.	The following functions are suspended: VDC TCS ABS EBD
C1116	When stop lamp switch signal is not input when brake pedal operates.	The following functions are suspended: VDC TCS
C1120	When a malfunction is detected in front LH ABS IN valve.	The following functions are suspended: VDC TCS ABS EBD
C1121	When a malfunction is detected in front LH ABS OUT valve.
C1122	When a malfunction is detected in front RH ABS IN valve.
C1123	When a malfunction is detected in front RH ABS OUT valve.
C1124	When a malfunction is detected in rear LH ABS IN valve.
C1125	When a malfunction is detected in rear LH ABS OUT valve.
C1126	When a malfunction is detected in rear RH ABS IN valve.
C1127	When a malfunction is detected in rear RH ABS OUT valve.
C1130	When a malfunction is detected in ECM system.	The following functions are suspended: VDC TCS
C1140	When a malfunction is detected in actuator relay.	The following functions are suspended: VDC TCS ABS EBD
C1142	When a malfunction is detected in VDC pressure sensor.	The following functions are suspended: VDC TCS
C1143	When a malfunction is detected in steering angle sensor.
C1144	When neutral position adjustment of steering angle sensor is not complete.
C1145	When a malfunction is detected in yaw rate signal, or signal line of yaw rate/side/decel G sensor is open or shorted.
C1146	When a malfunction is detected in side G signal, or signal line of yaw rate/side/decel G sensor is open or shorted.
C1153	When ABS actuator and electric unit (control unit) is malfunctioning. (Pressure increase is too much or too little.)	The following functions are suspended: VDC TCS ABS
C1155	When brake fluid level low signal is detected.	The following functions are suspended: VDC TCS
C1164	When a malfunction is detected in cut valve 1.	The following functions are suspended: VDC TCS ABS EBD
C1165	When a malfunction is detected in cut valve 2.
C1166	When a malfunction is detected in suction valve 1.
C1167	When a malfunction is detected in suction valve 2.
C1170	When the information in ABS actuator and electric unit (control unit) is not the same.	The following functions are suspended: VDC TCS ABS
U1000	When CAN communication signal is not continuously transmitted or received for 2 seconds or more.	The following functions are suspended: VDC TCS
U1002	When ABS actuator and electric unit (control unit) is not transmitting or receiving CAN communication signal for 2 seconds or less.
U1010	When detecting error during the initial diagnosis of CAN controller of ABS actuator and electric unit (control unit)