| Includes: R&I Engine and Transmission Assembly.
DOES NOT include wheel alignment. | 9.6 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Programming. | 0.6 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: |
| | 0.5 | | C |
| Combination Procedure: TRANSMISSION OIL COOLER & LINES: Flush: |
| Includes: Confirm Fluid temperature for level check. | 0.8 | | C |