Fuel Pressure Release

With CONSULT

1. Turn ignition switch ON.
2. Perform "ENGINE" in "WORK SUPPORT" mode with CONSULT.
3. Start the engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.

Without CONSULT

1. Remove fuel pump fuse located in IPDM E/R.
2. Start the engine.
3. After engine stalls, crank it two or three times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.

INSPECTION END