Component Function Check
- CHECK BRAKE PEDAL POSITION SWITCH FUNCTION
With CONSULT
- Turn ignition switch ON.
- Select "BRAKE SW" in "DATA MONITOR" mode of "ENGINE" with CONSULT.
- Check "BRAKE SW" indication as per the following conditions.
Monitor item
Condition
Indication
BRAKE SW 1
Brake pedal
Slightly depressed
OFF
Fully released
ON
Without CONSULT
- Turn ignition switch ON.
- Check the voltage between ECM harness connector terminals as per the following.
ECM
Condition
Voltage
(Approx.)
Connector
+
-
Terminal
E16
150
162
Brake pedal
Slightly depressed
0 V
Fully released
Battery voltage
Is the inspection result normal?
YES
INSPECTION END
NO
Refer to Diagnosis Procedure .