Component Inspection

1. Turn ignition switch OFF.
2. Disconnect engine coolant temperature sensor harness connector.
3. Remove engine coolant temperature sensor. Refer to Exploded View .
4. Check the resistance between engine coolant temperature sensor terminals by heating with hot water as shown in the figure, below.

   Courtesy of NISSAN NORTH AMERICA, INC.

   ECT sensor		Condition		Resistance
   Terminal
   1	2	Temperature [ deg. C (deg. F)]	20 (68)	2.37 - 2.63 kOhms
   			50 (122)	0.68 - 1.00 kOhms
   			90 (194)	0.236 - 0.260 kOhms

Is the inspection result normal?

YES

INSPECTION END

NO

Replace engine coolant temperature sensor. Refer to Exploded View .