April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wake-up operation

The BCM transmits the sleep wake up signal (wake up) to each unit when any of the CAN wake-up conditions are fulfilled. It changes from the low power consumption mode or the CAN communication sleep mode to the normal mode.
Each unit starts the transmission of CAN communication with the sleep wake up signal. In addition, the combination meter transmits the wake up signal to the BCM via CAN communication to report the CAN communication start.

BCM wake-up condition

CAN wake-up condition

Door lock assembly LH: Lock or unlock
Door lock switch: OFF->ON
Door unlock switch: OFF->ON
Trunk lid opener switch: OFF->ON
Intelligent Key unit: Receiving valid keyfob

Receiving the sleep-ready signal (Not-ready) from any units
Ignition switch: OFF->ON
Hazard switch: OFF->ON
Passing switch: OFF->ON, ON->OFF
Tail lamp switch: OFF->ON
Front door switch LH: OFF->ON, ON->OFF
Front door switch RH: OFF -> ON, ON -> OFF
Trunk lid opener assembly: OFF->ON, ON->OFF
Door request switch LH: OFF->ON
Door request switch RH: OFF->ON
Stop lamp switch signal: ON
Intelligent Key unit: Receiving valid keyfob