Float Level (On-Vehicle)
- Warm engine to normal operating temperature. With engine at idle and choke wide open, insert Float Level Gauge (J-34935-1 or BT-8420-A) into carburetor air horn vent slot. Allow gauge to float freely.
- Observe that mark on gauge lines up with top of air horn casting. Setting should be within 2/32" of specified float level setting. See FLOAT LEVEL SPECIFICATIONS table. If float level is not as specified, remove air horn and adjust float level.
FLOAT LEVEL SPECIFICATIONS
| Carburetor No. | Setting |
|---|---|
| 17086008 | 11/32" |
| 17086009 | 14/32" |
| 17088115 | 11/32" |