Fuel Injector(S)

Disconnect fuel injector harness connector. Measure resistance across injector terminals. Resistance should be as specified. See FUEL INJECTOR RESISTANCE table.

FUEL INJECTOR RESISTANCE

Application

⁽¹⁾ Resistance (Ohms)

2.0L (VIN K)

1.6

2.0L Turbo (VIN M)

2.0

2.2L (VIN G)

1.6

2.3L (VIN A & D)

1.9-2.1

2.5L (VIN R & U)

1.6

3.1L (VIN T)

12.0-12.4

3.1L Turbo (VIN V)

12.0-12.4

3.3L (VIN N)

⁽²⁾

3.8L (VIN C)

⁽²⁾

5.0L (VIN E)

1.2

5.0L (VIN F)

10.0

5.7L (VIN 7)

1.2

5.7L (VIN 8)

10.0

⁽¹⁾	Injector resistance specification is at 140°F (60°C).

⁽²⁾	Information not available from manufacturer. Solenoid should have resistance; however, infinite resistance indicates an open injector winding.

NOTE: If injectors are dirty, they should be cleaned using approved injector cleaning procedure before performing INJECTOR BALANCE TEST.