One Window (Except Left Front) Inoperative From Master &

INDIVIDUAL SWITCH, ALL OTHERS OPERATE

1. Turn ignition switch to RUN position. Using a test light, backprobe between Dark Blue wire and Brown wire terminals at inoperative window motor connector. While observing test light, press inoperative window switch to up and down positions. If test light is off, go to next step. If test light is on, check for poor connection at inoperative window motor. If connection is okay, replace inoperative window motor.
2. Backprobe between Brown wire or Dark Blue wire terminals at inoperative window switch connector and other 2 wire terminals from master switch to inoperative window switch connector. For wire identification, see WIRING DIAGRAMS  . If test light is on at all terminals,, go to next step. If test light is off at any terminal, check for poor connection at master switch. If connection is okay, repair open in appropriate wire(s) to inoperative window switch. If wire(s) are okay, replace master switch.
3. Backprobe between Dark Blue wire or Brown wire terminals and Brown wire terminal (to motor) at inoperative window switch connector. While observing test light, press inoperative window switch to up and down positions. If test light is off, check for poor connection at inoperative window switch. If connection is okay, replace switch. If test light is on, check for poor connection at inoperative window motor, or check for open in Dark Blue wire or Brown wire between switch and motor. If connection and wires are okay, replace inoperative window motor.