Fuel Injector(s)
Disconnect fuel injector harness connector. Measure resistance across injector terminals at each injector. Resistance should be as specified. See INJECTOR RESISTANCE SPECIFICATIONS table.
INJECTOR RESISTANCE SPECIFICATIONS (1)
| Application | Ohms | |||
|---|---|---|---|---|
| 3.8L | ||||
| VIN K | 11.8-12.6 | |||
| VIN 1 | 14.3-14.7 | |||
|
||||
NOTE:
If injectors are dirty, they should be cleaned using approved injector cleaning procedure before performing INJECTOR BALANCE TEST.