Circuit Description

Knock Sensor (KS) module is located in PCM and is replaceable. KS module reads KS to determine if excessive detonation (knock) is present. If excessive knock is present, PCM will retard timing until knock goes away. When KS module is missing or malfunctioning, PCM will set DTC P0325.

Conditions required to set DTC are:

• No fuel injector, misfire or TP sensor DTCs set.
• Engine running at least 10 seconds.
• ECT greater than 149°F (65°C).
• PCM detects problem with KS module causing knock to be indicated continuously.
• Listed conditions present for up to 2.5 seconds.