Right Front Window Does Not Operate
- Turn ignition switch to RUN position. Using a test light, backprobe between Dark Blue wire and Brown wire terminals at right front window switch connector. While observing test light, press right window switch to UP and DOWN positions. If test light is on in both switch positions, go to next step. If test light is not on in both switch positions, go to step 3).
- Using a test light, backprobe between right front window motor connector terminals. Press right front window switch to UP and DOWN positions. If test light is not on in both switch positions, repair open Tan or Light Blue wire between right front window switch and motor. If test light is on in both switch positions, check right front window motor harness connector for excessive resistance. If connector is okay, replace right front window motor.
- Using a test light, backprobe between Pink (Brown On "H" Body) and Light Blue wires at right front window switch connector. Then backprobe between Pink (Brown On "H" Body) and Tan wires at right front window switch connector. If test light is not on in both cases, go to next step. If test light is on in both cases, check right front window switch harness connector for excessive resistance. If connector is okay, replace right front window switch.
- Using a test light, backprobe between Tan and Light Blue wires at master window switch harness connector. Press right front window switch on master switch to UP and DOWN positions. If test light is on in both switch positions, repair open Tan or Light Blue wire between master window switch and right door window switch. If test light is not on in both switch positions, check master switch harness connector for excessive resistance. If okay, replace master switch.