Using Tech 1 Scan Tool: Notes

NOTE: When using Tech 1 scan tool for diagnostics, ABS/TCS system is disabled by EBCM/EBTCM. ANTI-LOCK indicator will illuminate indicating only normal power assist braking is available. After diagnostics have been completed using Tech 1 scan tool, disconnect scan tool from Data Link Connector (DLC) and turn ignition off for a least 10 seconds before road testing. This procedure is done to reset EBCM/EBTCM.

Connect Tech 1 scan tool to Data Link Connector (DLC) located under left side of instrument panel. Follow scan tool manufacturer's instructions to retrieve stored fault codes.

If multiple codes are displayed, begin diagnosis with code that is displayed first. See DIAGNOSTIC TROUBLE CODE table. Diagnose all codes in the order displayed by Tech 1 scan tool.