Individual Switches Are Inoperative, Master Switch Operative
- Check window lockout switch on master switch. If switch is not set to lockout position, go to next step. If switch is set to lockout position, change lockout switch position and recheck system operation.
- Disconnect master window switch connector. Disconnect right rear window switch connector. Turn ignition switch to RUN position. Connect a fused jumper between master window switch connector terminal "K" (Brown wire) and terminal "S" (Dark Blue wire). Connect test light between ground and right rear window switch connector terminal "F" (Dark Blue wire). If test light illuminates, go to next step. If test light does not illuminate, repair open in circuit No. 1307 (Dark Blue wire) between master window switch and splice S355.
- Check right front window switch connector for proper terminal contact. If terminal contact is okay, replace master switch.