Left Front Window Inoperative/All Others Okay
- Turn ignition switch to RUN position. Connect test light between left front door lock and side window switch 8-pin connector C2, terminals "A" (Dark Blue wire) and "E" (Brown wire). Operate switch between UP and DOWN positions. If test light illuminates in both directions, go to next step. If test light does not illuminate in both directions, check left front door lock and side window motor for poor terminal contact. If connection is okay, replace left front door lock and side window switch.
- Connect test light between left front window regulator motor connector terminals "B" (Dark Blue wire) and "A" (Brown wire). Observe test light and operate switch between UP and DOWN positions. If test light illuminates in both positions, check left front window regulator motor connector for poor terminal contact. If connection is okay, replace left front window regulator motor. If test light does not illuminate in both positions, repair open in Dark Blue or Brown wire between left front door lock and side window switch and left front window regulator motor.