LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1998 >> Cutlass Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> Diagnostic Tests >> DTC B2600: DRL Error >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2600: DRL Error: Testing

  1. If BFC diagnostic system check was performed, go to next step. If BFC diagnostic system check was not performed, see procedures in BFC DIAGNOSTIC SYSTEM CHECK  .
  2. If any other DRL DTCs exist, go to next step. If no other DRL DTCs exist, go to step 4).
  3. Repair all other DRL DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  . If system is operating properly, go to step 7). If system is not operating properly, go to next step.
  4. Remove DRL relay from underhood wiring harness junction block. Replace DRL relay with a known-good relay. Using scan tool, enable DRL relay. If automatic lighting control operates properly, go to next step. If automatic lighting control does not operate properly, go to step 6).
  5. Clear DTCs. Check for DTCs. If DTC B2600 exists, go to next step. If DTC B2600 does not exist, go to step 7).
  6. Replace BFC. See REMOVAL & INSTALLATION  . Go to next step.
  7. Clear DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  .


  1. If BFC diagnostic system check was performed, go to next step. If BFC diagnostic system check was not performed, see procedures in BFC DIAGNOSTIC SYSTEM CHECK  .
  2. If any other DRL DTCs exist, go to next step. If no other DRL DTCs exist, go to step 4).
  3. Repair all other DRL DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  . If system is operating properly, go to step 7). If system is not operating properly, go to next step.
  4. Remove DRL relay from underhood wiring harness junction block. Replace DRL relay with a known-good relay. Using scan tool, enable DRL relay. If automatic lighting control operates properly, go to next step. If automatic lighting control does not operate properly, go to step 6).
  5. Clear DTCs. Check for DTCs. If DTC B2600 exists, go to next step. If DTC B2600 does not exist, go to step 7).
  6. Replace BFC. See REMOVAL & INSTALLATION  . Go to next step.
  7. Clear DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals