One Or More Windows Inoperative From Individual Switches, Operate From Master Switch
- Disconnect inoperative power window switch connector. Turn ignition switch to RUN position. Press lockout switch in master window switch to OFF position. Using test light connected to ground, backprobe inoperative window switch connector terminal "F" (Dark Blue wire). See Figure . If test light illuminates, go to next step. If test light does not illuminate, go to step 3).
- Replace inoperative power window switch. Recheck system operation.
- Using test light connected to ground, backprobe splice pack S301 shorting bar. If test light illuminates, go to next step. If test light does not illuminate, go to step 5).
- Repair open in Dark Blue wire between inoperative window switch and splice pack S301. Recheck system operation.
- Using test light connected to ground, backprobe master window switch connector C2, terminal "D" (Dark Blue wire). If test light illuminates, go to next step. If test light does not illuminate, go tostep 7).
- Repair open in Dark Blue wire between master window switch and splice S301. Recheck system operation.
- Replace master window switch. Recheck system operation.