LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1998 >> Intrigue Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> Diagnostic Tests >> DTC B2735: Pass-Lock(R) Programming Mode Active >> Diagnostic Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedures

  1. If BCM diagnostic system check was performed, go to next step. If BCM diagnostic system check was not performed, see procedures in BCM DIAGNOSTIC SYSTEM CHECK  .
  2. Perform theft deterrent relearn procedures. See procedures in BCM PROGRAMMING  . After performing relearn procedures, go to step 4).
  3. Using scan tool, check for PASSLock(R) related DTCs B2722 or B2723. If any of this DTC is present, diagnose affected DTC(s). If these DTCs are not present, go to step 5).
  4. Using scan tool, clear DTCs. Check DTCs. If DTC B2735 is set as current DTC, go to step 3). If DTC B2735 is not present, system is okay.
  5. Replace BCM. Perform new BCM setup procedures. See procedures in BCM PROGRAMMING  . After programming BCM, go to next step.
  6. Turn ignition off. Reinstall all components and connectors. Turn ignition switch to RUN position. Using scan tool, clear DTCs. After clearing DTCs, perform BCM DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals