Park Lock Cable: Notes
WARNING:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section before disconnecting battery.
NOTE:
Not all models are equipped with a park lock cable. Park lock cable adjustment information for some models is not available from manufacturer.
- Remove console, left-side sound insulator and knee bolster as necessary. Ensure ignition switch is in LOCK position. Place park lock cable adjuster button in up (unlocked) position. Grasp cable at front of spring and move forward in vehicle to remove slack. Release cable.
- Move cable adjuster rearward in vehicle 1/16" from previous position. While holding cable in this position, push adjuster button down flush with adjuster body. Check park lock cable operation.