Transfer Case (NVG226-NP8) DTCS
TRANSFER CASE (NVG226-NP8) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| DTC B0770 | AWD Indicator Control Circuit Voltage |
| DTC B0775 | 4HI Indicator Control Circuit Voltage |
| DTC B0780 | 4LO Indicator Control Circuit Voltage |
| DTC B0785 | 2HI Indicator Control Circuit Voltage |
| DTC B0790 | Neutral Indicator Control Circuit Voltage |
| DTC B2725 | Switch Signal Circuit Voltage |
| DTC C0300 | Open, Short To Ground, Short To Voltage Or Faulty Sensor |
| DTC C0305 | Open, Short To Ground, Short To Voltage Or Faulty Sensor |
| DTC C0306 | Open, Short To Voltage, Or Short To Ground In Motor Control A Or Motor Control B Circuits, Or An Open, Or Short To Ground Inside Motor |
| DTC C0321 | Open Lock Solenoid Coil, Open Motor Lock Control Circuit, Or An Open Motor Lock Feed Circuit |
| DTC C0327 | Out-Of-Range Reading From The Encoder Signal, A Short To Voltage On 5 V Reg. Encoder Circuit |
| DTC C0359 | Short To Ground, Short To Voltage, Or An Open In The 4WD Lo Circuit |
| DTC C0374 | Unable To Correct Sensed Wheel Slip |
| DTC C0379 | Front Axle Control Circuit Short To Ground, Short To Voltage, Or An Open Circuit |
| DTC C0550 | Critical Operational Parameters Stored In EEPROM Have Failed, Checksum Error |