Installation Procedure
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
Important: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
- Connect the battery negative cable to the battery.
Tighten
Tighten the battery negative terminal bolt to 15 N.m (11 lb ft).
- Unlock the Theftlock® radio if applicable.
- Program the radio stations back into the radio as recorded at the beginning of the procedure.
- Set the clock to the current time. Refer to RADIO/AUDIO SYSTEM DESCRIPTION AND OPERATION in Entertainment.