STOPLAMP Switch
CAUTION:
Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
NOTE:
Adjust the stoplamp switch and the cruise control switch at the same time.
- With the brake pedal in the fully released position, ensure the stoplamp plunger is fully depressed against the brake pedal shanks. See Fig 1 .
- Fully insert the stoplamp switch and the cruise control switch (if equipped) into the brake pedal bracket.
- Push the brake pedal forward in order to set the brake push rod into the booster. See Fig 2 .
- Pull the brake pedal to the rear, against the internal stop. This adjusts both the stoplamp switch and the cruise control switch.
- Inspect the stoplamp switch for proper adjustment. See Fig 1 .