LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.2L (Introduction) >> Repair Instructions >> Heated Oxygen Sensor Replacement - Position 1 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: Refer to Heated Oxygen Sensor (HO2S) Resistance Learn Reset Notice in Cautions and Notices.
NOTE: Refer to Heated Oxygen and Oxygen Sensor Notice in Cautions and Notices.
    Fig 1: Removing/Installing HO2S
    GM730852Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the heated oxygen sensor (HO2S) electrical connector (1).
  2. NOTE: Refer to Excessive Force and Oxygen Sensor Notice in Cautions and Notices.
  3. Remove the HO2S (2) using a J 39194-B  . See Special Tools and Equipment .