Steering Columns: Overhaul: Assembly
- Assemble flat washer, lock cylinder housing, washer and snap ring on the shaft. Then install shaft assembly in the steering column and install lock cylinder retaining screws.
- Install windshield wiper/washer switch and combination turn signal, headlight dimmer, and hazard warning flasher switch. Install upper and lower column covers and hazard warning button.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) |
|---|---|
| Key Bolt | 18 (2.49) |
| Steering Wheel Nut | 22 (3.04) |