LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1980 >> Arrow Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Electronic Ignition >> Overhaul >> Reassembly >> 4-Cylinder Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

4-Cylinder Models

  1. Lubricate bushings with oil. Install shaft into distributor housing. Install gear and then roll pin on shaft.
  2. Install Hall Effect assembly being careful to place lead retainer in its locating hole before attaching distributor cap. Install Hall Effect assembly retaining clips.
  3. Install vacuum unit and linking pin. Make sure linking pin is located properly. Install vacuum unit retaining screws and tighten. Install Hall Effect rotor on distributor shaft.
scientia non olet · About LEMON Manuals