Valve Clearance
NOTE:
Jet valve clearance must be adjusted before adjusting intake valve clearance. Loosen intake valve adjusting screw at least 2 full turns before adjusting jet valve.
Check or adjust valve clearance with engine off, at normal operating temperature and with coil wire to distributor disconnected. To adjust valves, loosen lock nut and turn adjusting screw until specified clearance is obtained.
VALVE CLEARANCE SPECIFICATIONS
| Application | Clearance |
|---|---|
| Jet | .006" (.15 mm) |
| Intake | .006" (.15 mm) |
| Exhaust | .010" (.25 mm) |