Removal & Installation
WARNING: This page is about the Sapporo Automatic Trans, which is a different variant/trim than selected.
3 SPEED TRANS, TRANS ID - A727, A904, A904-LA, MA904, MA904A
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.5 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: INPUT SHAFT: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: KICKDOWN BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: LOW & REVERSE BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Combination Procedure: OIL PUMP HOUSING: Remove & Replace: | ||||
| Rear | 2.0 | B | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: OUTPUT SHAFT: Remove & Replace: | ||||
| 2.4 | B | |||
| Combination Procedure: REACTION SHAFT: Remove & Replace: | ||||
| 0.6 | A | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||