Ignition Coil Resistance

Using a Digital Volt/Ohmmeter (DVOM), measure primary coil resistance between ignition coil connector terminals No. 2 and No. 3 (coils for cylinders No. 1 and No. 4) and terminals No. 1 and No. 3 (coils for cylinders No. 2 and No. 3). See Fig 1 .
Measure secondary coil resistance between coil towers for cylinders No. 1 and No. 4 and between coil towers for cylinders No. 2 and No. 3. See Fig 2 . Primary and secondary coil resistance should be within specification. See DIS IGNITION COIL RESISTANCE table.

DIS IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

Application	Primary	Secondary
All Models	.77-.95	10.3-13.9

Fig 1: Testing Ignition Coil Primary Resistance (DIS Models)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Testing Ignition Coil Secondary Resistance (DIS Models)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.