Removal & Installation
- O2 Sensor is mounted in exhaust pipe below exhaust header. It is equipped with a permanent pigtail which must be protected from damage when sensor is removed. Ensure sensor is free of contaminants, avoid using cleaning solvents of any type. Sensor may be difficult to remove when engine temperature is less than 120° F (48° C).
- Always use anti-seize compound on threads before installation. On non-turbo models, remove sensor using Remover (MD998703 ). On turbo models, use Remover (MD998748 ) on Eclipse and Galant, or Remover (MD998770 ) on Stealth and 3000GT. Tighten oxygen sensor to specification. See TORQUE SPECIFICATIONS table.