Ignition Coil Resistance

Using a Digital Volt-Ohmmeter (DVOM), measure primary coil resistance between ignition coil connector terminals No. 2 and 3 (coils for cylinders No. 1 and 4) and terminals No. 1 and 3 (coils for cylinders No. 2 and 3). See Fig 1 .

Disconnect ignition coil connector. Measure secondary coil resistance between coil towers for cylinders No. 1 and 4 and between coil towers for cylinders No. 2 and 3. See Fig 2 . Primary and secondary coil resistance should be within specification. See IGNITION COIL RESISTANCE (1.6L) table.

IGNITION COIL RESISTANCE (1.6L) Ohms @ 68°F (20°C)

Application	Primary	Secondary
Mirage	.77-.95	10,300-13,900

Fig 1: Testing Ignition Coil Primary Resistance (1.6L)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Testing Ignition Coil Secondary Resistance (1.6L)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.