LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1992 >> Colt Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> Fuel Evaporation >> System Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Test

  1. Disconnect Red-striped purge hose from throttle body, and connect it to hand vacuum pump. Plug nipple on throttle body where purge hose was removed.
  2. With engine coolant temperature at 140°F (60°C) or less and engine idling, apply 14.8 in. Hg. Ensure vacuum is held. Raise engine speed to 3000 RPM and again apply 14.8 in. Hg. Ensure vacuum is held.
  3. With engine coolant temperature at 158°F (70°C) or more and engine idling, apply 14.8 in. Hg. Ensure vacuum is held. Turn engine off. Start engine and within 3 minutes of starting engine, apply vacuum. Ensure vacuum bleeds down.
  4. With engine running for more than 3 minutes after starting, raise engine speed to 3000 RPM and apply 14.8 in. Hg. Ensure vacuum holds momentarily and then bleeds down.
    NOTE: In step 4), vacuum should bleed down continuously if vehicle is at an altitude of 7200 feet (2200 m) or higher, or if intake air temperature is 122°F (50°C) or higher.
scientia non olet · About LEMON Manuals