LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1994 >> Laser Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays & Solenoids >> Relays >> Control Relay (2.0L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Relay (2.0L)

  1. Control relay is located on right side of center console. Disconnect control relay connector.
  2. Using a 12-volt power source, connect positive lead to control relay terminal No. 10 and negative lead to terminal No. 8. See Fig 1 . Using a voltmeter, check for voltage at terminals No. 4 and 5. Battery voltage should exist. Disconnect power source negative lead from terminal No. 8. Voltage should no longer exist at terminals No. 4 and 5.
  3. Connect power source positive lead to control relay terminal No. 9 and negative lead to terminal No. 6. Ensure continuity is present between terminals No. 2 and 3. Disconnect power source negative lead from terminal No. 6. Continuity should not exist between terminals No. 2 and 3.
  4. Connect power source positive lead to terminal No. 3 and negative lead to terminal No. 7. If battery voltage does not exist at terminal No. 2, replace control relay. Disconnect power source negative lead from terminal No. 7. Battery voltage should not be present at terminal No. 2. If battery voltage is present at terminal No. 2, replace control relay.
Fig 1: Control Relay Connector Terminal ID (2.0L)
G90H06294Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals