LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 2000 >> Neon Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Power Window Motor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Motor

  1. Remove door trim panel. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION. Disconnect window motor connector. Using jumper wires, apply battery voltage to one window motor terminal and ground to other terminal. Motor should operate, unless window is already at maximum travel. Reverse jumper wires. Window should move in opposite direction.
  2. If window does not move in either direction, check window/regulator for freedom of movement. Remove screws holding glass lift plate to regulator. Slide window up and down by hand to ensure it moves freely in glass channels. If window slides freely, check regulator assembly. Repair window/regulator as necessary. If window slides freely and window/regulator is okay, replace window motor.
scientia non olet · About LEMON Manuals