LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 2000 >> Neon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self Diagnostics >> Diagnostic Tests >> Test VER-2A: Road Test For Non OBD-II Trouble Codes >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Ensure no DTCs exists. If any DTCs exist, perform appropriate DTC test and then perform appropriate verification test.
  2. If test is not being performed after performing a NO TROUBLE CODE (NTC) test, go to next step. If test is being performed after performing a NO TROUBLE CODE (NTC) test, check if initial symptom still exists. If initial symptom or another symptom exists, test is not complete. Check for related Technical Service Bulletins (TSBs) or flash updates for the symptom and return to TEST NTC-1: NO TROUBLE CODE TEST MENU  for engine diagnosis.
  3. Connect scan tool to DLC. Clear all DTCs from PCM and reset all values. Road test vehicle and use all accessories that may be related to the repair.
  4. Using scan tool, check for DTCs. If the repaired DTC or symptom reoccurs, the repair is not complete. If any DTCs reoccur, check for related Technical Service Bulletins (TSBs) or flash updates and return to appropriate DTC test. If no DTCs or symptoms exist, repair is complete.