Fuel Control System
The basic function of the fuel control system is to control fuel delivery to the engine. Fuel is delivered to the engine by individual fuel injectors mounted in the intake manifold near each intake valve. The main control sensor of this system is the O2 sensor. The O2 sensor tells the ECM how much oxygen is in the exhaust gas. The ECM then changes the air and fuel ratio to the engine by controlling the injector on time.
The fuel control system is made up of the following parts: fuel injectors, throttle body, fuel rail, fuel pressure regulator, idle air control valve, fuel pump and fuel pump relay. The fuel control system starts with the fuel in the fuel tank. An electric fuel pump, located in the fuel tank with the fuel gauge sending unit, pumps fuel to the fuel rail through an in-line fuel filter. The pump is designed to provide fuel at a pressure above the pressure needed by the injectors.
A pressure regulator in the fuel rail keeps fuel available to the injectors at a constant pressure. Unused fuel is returned to the fuel tank by a separate return line. In order for the fuel injectors to supply a precise amount of fuel at the command of the ECM, the fuel supply system maintains a constant pressure of approximately 34-46 psi (2.4-3.2 kg/cm2 ) drop across the injectors. When the ignition is turned on, the ECM will turn on the in-tank fuel pump. It will remain on as long as the engine is cranking or running. It senses this from distributor reference pulses.
As manifold vacuum changes, the fuel system pressure regulator controls the fuel supply pressure to compensate. The fuel pressure accumulator, used on selected applications, isolates fuel line noises. The fuel rail is bolted rigidly to the engine. It provides the upper mount for the injectors. It also contains a spring-loaded pressure tap for testing the fuel system pressure.