LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 1987 >> Fiero Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Toe-In Adjustment: Front

  1. Toe-in is changed by adjusting length of tie rods. When tie rods are mounted ahead of steering knuckle, decrease length in order to increase toe-in. Loosen clamp bolts at each end of steering tie rod adjustment sleeve.
  2. On models with rack and pinion steering loosen jam nut. With steering wheel set straight ahead, turn tie rod adjusting sleeves to obtain the proper toe-in adjustment.
  3. With adjustment completed, ensure number of threads showing on each end of sleeve are equal and tie rod end housing is at right angles to steering arm. Also ensure steering wheel spokes are level.
  4. Position tie rod clamps and sleeves correctly. See Figure . Tighten to specifications. On rack and pinion models, tighten jam nut after toe is set to specifications.
scientia non olet · About LEMON Manuals