Passenger Side Window Does Not Work
- Ensure wiper fuse is good. With ignition switch in RUN or ACC position, check for voltage at passenger side switch. If there is no voltage, check for open between switch and fuse block. If okay, go to next step.
- With voltage applied to Pink wire at the switch, move switch to the UP position. Ensure voltage is present at Dark Blue wire. If voltage is not present, replace switch. If okay, go to next step.
- With power window switch in the UP position, check Dark Blue wire at power window motor for voltage. If voltage is not present, check for open between switch and motor.
- If voltage is present, connect a grounded jumper wire to Brown wire at the motor. If motor runs, check for open in ground circuit. If motor does not run, replace power window motor.