One Window (Except Left Front) Inoperative From Master &

INDIVIDUAL SWITCH, ALL OTHERS OPERATE

1. Turn ignition switch to RUN position. Using a test light, backprobe between Dark Blue wire and Brown wire terminals at inoperative window motor connector. While observing test light, press inoperative window switch to up and down positions. If test light is off, go to next step. If test light is on, check for poor connection at inoperative window motor. If connection is okay, replace inoperative window motor.
2. Disconnect inoperative window switch connector. Connect test light to inoperative window switch between Light Blue wire and Tan wire terminals at right window switch connector, Light Green wire and Purple wire terminals at right rear window switch connector and Dark Green wire and Purple wire terminals at left rear window switch connector.
3. While observing test light, press inoperative window switch at master switch to up and down position. If test light is on at all specified wire terminals, go to next step. If test light is off at any wire terminal, check for poor connection at inoperative window switch. If connection is okay, repair open in appropriate wire(s) to inoperative window switch. If wire(s) are okay, replace master switch.
4. Backprobe between Dark Blue wire and Brown wire terminals at inoperative window switch connector. While observing test light, press inoperative window switch at master switch to up and down position. If test light is on, check for poor connection at inoperative window motor, or repair open in Dark Blue wire or Brown wire between inoperative window switch and motor. If wire is okay, replace motor. If test light is off, check for poor connection at inoperative window switch. If connection is okay, replace inoperative window switch.