Piston Ring Set: Remove & Replace

WARNING: This page is about the Firebird Base, 2D Convertible, Automatic, which is a different variant/trim than selected.

Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable). DOES NOT include Pin fit and/or align.

Applies To	Standard Hours	Warranty Hours	Skill Level
V6, All Cylinders	21.2		A
Additional Procedure: PISTON RING SET: Remove & Replace:
V6, Where Pwr Strg Interferes add	0.5	0.5	A
Where Cruise Control interferes add	0.2		A
Where Elect Eng System interferes add	0.5		A
Combination Procedure: MAIN BEARINGS: Remove & Replace:
All	1.5		A
Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align.
Each	0.3		A
Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble:
Both	0.6		B
One	0.3		B
Combination Procedure: ROCKER ARM STUD: Remove & Replace:
Each Additional,Press in Type	0.2		B
Each Additional,Screw in Type	0.1		B
One,Press in Type	0.3		B
One,Screw in Type	0.2		B
Combination Procedure: VALVE LIFTERS (REMOVED): Clean:
Each Additional	0.1		B
One	0.2		B
Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct:
Per 3 Springs	0.2		A