Grind Complete
WARNING: This page is about the Firebird Base, 2D Convertible, Automatic, which is a different variant/trim than selected.
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| V6 | 16.7 | A | ||
| Additional Procedure: VALVE: Grind Complete: | ||||
| Where Air Cond interferes add | 0.5 | A | ||
| Where Cruise Control interferes add | 0.2 | A | ||
| Where Elect Eng System interferes add | 0.5 | A | ||
| Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble: | ||||
| Both | 0.6 | B | ||
| One | 0.3 | B | ||
| Combination Procedure: ROCKER ARM STUD: Remove & Replace: | ||||
| Each Additional,Press in Type | 0.2 | B | ||
| Each Additional,Screw in Type | 0.1 | B | ||
| One,Press in Type | 0.3 | B | ||
| One,Screw in Type | 0.2 | B | ||
| Combination Procedure: VALVE LIFTERS: Remove & Replace: | ||||
| V6 | 0.4 | B | ||
| Combination Procedure: VALVE LIFTERS (REMOVED): Clean: | ||||
| Each Additional | 0.1 | B | ||
| One | 0.2 | B | ||
| Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct: | ||||
| Per 3 Springs | 0.2 | A | ||